# Cost of Quality in the Garment Industry: Formula, Examples and Calculator

> Cost of quality in the garment industry: the PAF formula, garment examples per category, rework priced at CPM, a worked month and a free calculator.

**Source:** [https://scanerp.pro/blog/cost-of-quality-garment-industry.html](https://scanerp.pro/blog/cost-of-quality-garment-industry.html)

---

# Cost of Quality in the Garment Industry: Formula, Examples and Calculator

· November 18, 2026 · 9 min read Quality Control

**Quick answer.** Cost of quality (COQ) is everything a factory spends to prevent, find and fix defects.

**COQ = prevention + appraisal + internal failure + external failure**

Illustrative month: training Rs 18,000, inspection Rs 53,000, rework and rejects Rs 18,984, buyer claim Rs 15,000. COQ = **Rs 104,984**, or 11.05% of Rs 950,000 sales. The failure part (Rs 33,984) is the cost of poor quality.

Want your rework and reject numbers from your own floor? [Ask on WhatsApp →](https://wa.me/9779704778917?text=Hi%2C%20I%20used%20your%20cost%20of%20quality%20calculator.%20I%20want%20to%20see%20how%20Scan%20ERP%20tracks%20DHU%2C%20rework%20and%20rejects%20live.)

Cost of quality in the garment industry is rarely a single line in the accounts. It is spread across the checkers' wages, the minutes operators spend unpicking seams, the fabric a buyer charges for rejected panels, the audit that had to be booked twice and the claim deducted from a payment. Adding those up, in four standard buckets, shows how much a factory spends on quality and, more usefully, how much of it is spent on fixing mistakes rather than preventing them. This guide gives the formula, garment examples for each category, a way to price rework that is consistent with an all-in cost per minute, and a worked month.

## What is the cost of quality formula?

**Cost of quality = prevention costs + appraisal costs + internal failure costs + external failure costs.** These are the four categories ASQ uses. In the illustrative month in this guide, Rs 18,000 + Rs 53,000 + Rs 18,984 + Rs 15,000 = Rs 104,984, which is 11.05% of that month's Rs 950,000 sales.

COQ = Prevention + Appraisal + Internal failure + External failure

and

COQ % of sales = COQ ÷ Sales in the same period × 100

ASQ (the American Society for Quality) describes cost of quality as a methodology that lets an organisation see how much of its resources go to preventing poor quality, appraising quality, and dealing with internal and external failures. Its definitions of the four categories are ([ASQ, Cost of Quality](https://asq.org/quality-resources/cost-of-quality)):

- **Prevention costs:** "costs incurred to keep failure and appraisal costs to a minimum".
- **Appraisal costs:** "costs incurred to determine the degree of conformance to quality requirements".
- **Internal failure costs:** "costs associated with defects found before the customer receives the product or service".
- **External failure costs:** "costs associated with defects found after the customer receives the product or service".

This four-way split is often called the prevention-appraisal-failure (PAF) model. Prevention and appraisal are what you spend to get quality right; the two failure categories are what you lose when you do not.

## Prevention, appraisal and failure costs in a garment factory

ASQ's own examples are generic (training, quality planning, audits, scrap, rework, warranty claims, returns). On a sewing floor they translate roughly as follows. Where an item could sit in two buckets, pick one and keep it there every month.

| Category | Garment factory examples | Where the number comes from |
|---|---|---|
| **Prevention** | Operator and checker training on quality standards; pre-production meetings; first-piece (first-bundle) approval before bulk; making guides, folders and templates that stop a defect recurring | Trainer and trainee hours, meeting time, cost of attachments |
| **Appraisal** | Fabric inspection; [inline inspection](https://scanerp.pro/tools/inline-inspection-report-format.html) and end-line checking; final [AQL audits](https://scanerp.pro/aql/); buyer or third-party inspection fees; lab tests | Checker and auditor wages, inspection invoices, test reports |
| **Internal failure** | Rework minutes; B-grade and rejected pieces; replacement fabric or panels for rejects; re-cutting; re-inspection after a failed audit; overtime to recover a quality delay | Repair records, reject register, buyer fabric debit notes, overtime sheets |
| **External failure** | Buyer claims and chargebacks; returns; discounts accepted for quality; re-inspection or sorting at the buyer's end; air freight when a quality problem made the shipment late | Debit notes, credit notes, freight invoices |

Two cautions. First, many of these costs are already inside your factory cost base: checker wages, for example, sit in the monthly cost that the all-in cost per minute is built from. COQ does not add them a second time; it regroups costs you already pay so you can see them as quality costs. One overlap to watch: rework priced at the all-in CPM carries a small share of every monthly cost, checker wages included. If checker wages are listed under appraisal, you can price rework at operator wage per minute instead; in this illustrative month the overlap is a few hundred rupees at most. Second, some external failure costs, such as an order a buyer does not repeat, are real but cannot be counted reliably. Leave them out of the number and mention them in words.

## How do you calculate the cost of rework in a garment factory?

**Rework cost = rework standard minutes × your all-in cost per minute.** Count the pieces repaired, multiply by the standard minutes of the operations that had to be unpicked and resewn, and price those minutes at your CPM. Illustrative example: 1,200 repaired pieces × 2.0 minutes × Rs 2.91 = Rs 6,984.

Rework cost = Pieces repaired × (SAM of the operations redone + timed unpicking minutes) × CPM

The Rs 2.91 is the all-in cost per minute from our [garment costing and CMT calculation guide](https://scanerp.pro/blog/garment-costing-cmt-calculation-guide.html): Rs 800,000 monthly factory cost ÷ 274,560 productive minutes. That CPM already includes rent, power, helpers and admin, so no separate overhead percentage is added on top. Because it is a cost per *standard* minute (efficiency is built in), it must be multiplied by standard minutes, which means the SAM of the operations redone. If you instead time rework on the clock, use a cost per paid minute: Rs 800,000 ÷ (26 × 8 × 60 × 40) = Rs 1.60 per paid minute in the same example. Do not mix the two.

### How DHU and RFT feed the rework number

Your quality records already hold most of the inputs. [RFT (Right First Time)](https://scanerp.pro/blog/rft-right-first-time-garment-industry.html) tells you how many pieces failed first inspection: if checkers inspected 9,600 pieces and RFT was 87.5%, then 9,600 × (1 − 0.875) = 1,200 pieces went for repair, which is the count used above. [DHU (defects per hundred units)](https://scanerp.pro/blog/dhu-benchmarks-garment-factory-2026.html) counts defects rather than pieces, so when one garment can carry several defects, a more precise method is defects by type × repair minutes for that defect type. Either way, the repair minutes per piece or per defect should come from the SAM of the operations involved, not a guess.

Rework is not the whole of internal failure. A piece that cannot be repaired becomes B-grade or a reject, and in CMT work the buyer may debit the factory for the fabric. That is a cash cost outside the CPM and goes into internal failure at the amount charged.

## What is the cost of poor quality formula?

**Cost of poor quality = internal failure costs + external failure costs: the money lost because work was not right first time, whether the defect was found before shipment (rework, rejects, re-inspection) or after it (claims, returns, chargebacks).** Usage varies between authors, so state which definition your report uses.

Cost of poor quality = Internal failure + External failure

This is the part of COQ that a factory wants to shrink. Prevention and appraisal are choices; failure costs are the consequence of those choices. In ASQ's definition, prevention spending exists to keep failure and appraisal costs to a minimum. Whether extra prevention actually lowers them in your factory is something to measure month by month, not assume.

## Worked example: one month in a CMT factory

**Illustrative example (one month, CMT factory, numbers chosen for the arithmetic; the amounts are not taken from the costing guide’s cost base):**

**Prevention:** quality training Rs 12,000 + pre-production meetings and first-piece approvals Rs 6,000 = **Rs 18,000**

**Appraisal:** inline and end-line checker wages Rs 45,000 + final AQL audit fees Rs 8,000 = **Rs 53,000**

**Internal failure:** rework 1,200 pieces × 2.0 min (SAM redone + timed unpicking) × Rs 2.91 = Rs 6,984 + fabric debited by the buyer for rejects Rs 9,000 + re-inspection after a failed audit Rs 3,000 = **Rs 18,984**

**External failure:** buyer quality claim on one shipment = **Rs 15,000**

**Total COQ** = 18,000 + 53,000 + 18,984 + 15,000 = **Rs 104,984**

**Cost of poor quality** = 18,984 + 15,000 = **Rs 33,984** (3.58% of sales)

**Sales (CM invoiced) in the month:** Rs 950,000

COQ = 104,984 ÷ 950,000 × 100 = 11.05% of sales

| Category | Amount (Rs) | Share of COQ | % of sales |
|---|---|---|---|
| Prevention | 18,000 | 17.15% | 1.89% |
| Appraisal | 53,000 | 50.48% | 5.58% |
| Internal failure | 18,984 | 18.08% | 2.00% |
| External failure | 15,000 | 14.29% | 1.58% |
| **Total COQ** | **104,984** | **100.00%** | **11.05%** |

In this made-up month, half of the quality spend goes on checking. That is the pattern to look for in your own figures: we read a high appraisal share next to a low prevention share as a sign that defects are being caught rather than stopped.

### COQ as a percentage of sales or FOB value

Divide by the revenue the factory itself invoices in the same period. For a CMT factory that is CM revenue, not the buyer's FOB value, because the fabric never passed through your accounts. A factory selling FOB divides by FOB value shipped, for example pieces shipped × the FOB price (our costing guide works through a polo at Rs 337.11 FOB). Keep the period the same on both sides: a claim settled in March for a January shipment still belongs to March's report unless you track by order.

How high is too high? ASQ states that "many organizations will have true quality-related costs as high as 15 to 20 percent of sales revenue" ([ASQ](https://asq.org/quality-resources/cost-of-quality)); that is a general statement, not a garment benchmark. One garment-specific case study, of a single small export factory in Addis Ababa, measured COQ at 23% of sales revenue, split as prevention 4.8%, appraisal 10.2%, internal failure 7.4% and external failure 0.54% ([Panghal, Prasad and Tilahun, JTATM, 2022](https://jtatm.textiles.ncsu.edu/index.php/JTATM/article/view/17961)). One factory is not a benchmark for yours. Your own trend, month on month, is the comparison that matters.

## Common mistakes in cost of quality calculation

- **Pricing rework at clock minutes × CPM.** CPM is per standard minute; clock minutes need the cost per paid minute.
- **Adding a separate overhead percentage to rework.** An all-in CPM already contains it.
- **Counting only rework.** Fabric debits, re-inspections and claims can be larger than the sewing minutes.
- **Moving items between categories.** If first-piece approval is prevention this month, it is prevention every month.
- **Dividing CMT costs by FOB value.** It makes COQ look smaller than it is.
- **Estimating repair minutes.** Use the SAM of the operations redone, and add unpicking time, which no SAM includes: time it on a sample of repairs.

## Where the inputs come from

COQ is only as good as the repair and reject counts behind it. On paper those live in tally sheets that someone adds up at month end. In Scan ERP the checking table is a scan point: the checker scans the bundle QR and records pass or the defect type, damage reports carry photo evidence and severity, damaged pieces go into repair bundles with their own QR codes, and B-grade pieces are segregated by defect type, with live DHU and Pareto dashboards. That gives the repaired-piece and reject counts by line and style. What a QC platform for a sewing factory needs is covered in our guide to [garment QC software](https://scanerp.pro/blog/garment-qc-software.html).

## Sources

- ASQ (American Society for Quality), ["What is Cost of Quality (COQ)?"](https://asq.org/quality-resources/cost-of-quality): definitions of the four categories, examples, and the statement on quality-related costs as a share of sales revenue.
- Monika Panghal, Sandeep Prasad and Shumet Tilahun, ["Quantification of Cost of Quality: A Case Study in an Ethiopian Apparel Manufacturing Factory"](https://jtatm.textiles.ncsu.edu/index.php/JTATM/article/view/17961), *Journal of Textile and Apparel, Technology and Management*, 12(3), 2022.
- Scan ERP, [Cost Per Minute (CPM) Formula and Garment Costing](https://scanerp.pro/blog/garment-costing-cmt-calculation-guide.html): the all-in CPM of Rs 2.91 used for rework.

### Rework and Rejects, Counted as They Happen

Scan ERP records defects, repair bundles and B-grade pieces from QR scans at the checking table on your own floor, with live DHU and Pareto dashboards: no month-end tally. Ask the founder on WhatsApp and see it on a real line.

[Ask on WhatsApp](https://wa.me/9779704778917?text=Hi%2C%20I%20used%20your%20cost%20of%20quality%20calculator.%20I%20want%20to%20see%20how%20Scan%20ERP%20tracks%20DHU%2C%20rework%20and%20rejects%20live.) [Request a Free Demo](https://scanerp.pro/#contact)
