# IE Formulas in the Garment Industry: Every Industrial Engineering Formula on One Page

> Every IE formula in the garment industry on one page: SMV, line efficiency, targets, takt time, line balancing, CPM, DHU, RFT and more, each with a guide.

**Source:** [https://scanerp.pro/blog/ie-formulas-garment-industry.html](https://scanerp.pro/blog/ie-formulas-garment-industry.html)

---

# IE Formulas in the Garment Industry: Every Industrial Engineering Formula on One Page

· November 18, 2026 · 13 min read Industrial Engineering

**Quick answer.** IE formulas turn the standard minutes of a garment into targets, efficiency, manpower and cost. A good example is line efficiency:

**Line efficiency % = (first-pass pieces × garment SAM) ÷ (operators × minutes paid for) × 100**

Illustrative example: a line of **48** operators works **480** minutes and makes **350** garments of SAM **44.25**. Minutes produced = 15,487.5; minutes available = 23,040. Efficiency = 15,487.5 ÷ 23,040 × 100 = **67.22%**. Every other formula is in the tables below.

Pick a formula group

[Time standards (SMV, SAM, SAH)](#time-standards) · [Line output (efficiency, target, takt, balancing, manpower, MMR)](#line-output) · [Pitch time, utilisation, productivity](#no-guide-yet) · [Cost (CPM, CM, FOB, COQ)](#cost) · [Quality (DHU, RFT, AQL)](#quality) · [People (absenteeism, turnover)](#people) · [Cutting (marker, fabric)](#cutting) · [IE tools](#ie-tools)

Search for IE formulas in the garment industry and many results are posters, slide decks and scanned PDFs: a list of equations with no worked numbers and no way to check them. This page is the opposite. It is one clean reference table, grouped the way a factory uses the numbers, and every formula links to a full guide on this site with a step-by-step example and, for most, a free calculator. The formulas here match those guides, so the hub and the detailed pages agree. In every formula below, efficiency is a decimal (0.70, not 70) unless the result is shown as a %.

## What is IE in the garment industry?

**IE is short for industrial engineering. In a garment factory, the IE team sets the standard minutes for every sewing operation and turns them into targets, line layouts, manpower plans, efficiency reports and the cost per garment. Almost every IE formula starts from the same input: the SMV or SAM of the garment and its operations.**

So the IE full form in the garment industry is simply *Industrial Engineering*, and the person doing it is the IE or industrial engineer. What that person does all day, what an IE department costs and which tasks software can take over is covered in our separate guide to the [industrial engineer's role in a garment factory](https://scanerp.pro/blog/industrial-engineer-garment-factory.html). This page sticks to the formulas.

## Time standards: SMV, SAM and SAH

Every IE calculation in garments starts with a time standard: how many minutes a trained operator, working at a normal pace with allowances, needs for one operation. Get this wrong and every later formula inherits the error.

| Formula | What it tells you | Full guide |
|---|---|---|
| **SAM** = Observed time × (Rating ÷ 100) × (1 + Allowance%) | The standard minutes for one operation, from a time study | [SMV and SAM calculation, with calculator](https://scanerp.pro/blog/sam-smv-calculation-garment-industry.html) |
| **Basic time** = Observed time × (Rating ÷ 100) | The time at a normal pace, before allowances | [SMV and SAM calculation](https://scanerp.pro/blog/sam-smv-calculation-garment-industry.html) |
| **SMV vs SAM:** no single formula; state whether allowances are inside the number, and at what percentage | Whether two SMV figures can be compared or used in a quote | [SAM vs SMV: the difference](https://scanerp.pro/blog/sam-vs-smv-difference-garment-industry.html) |
| **Operator efficiency %** = (Earned minutes ÷ Worked minutes) × 100, where Earned minutes = Pieces completed × Operation SAM | How one operator performs against the standard | [SMV and SAM calculation](https://scanerp.pro/blog/sam-smv-calculation-garment-industry.html) |
| **SAH** = Σ(pieces produced × SAM) ÷ 60 | Output in hours of standard work, so different styles can be added together | [SAH (standard hours earned), with calculator](https://scanerp.pro/blog/standard-hours-earned-sah-garment-industry.html) |
| **Efficiency %** = SAH ÷ attended hours × 100; **On-standard efficiency %** = SAH ÷ worked hours × 100 | Unit efficiency across mixed styles; the on-standard version leaves out off-standard time such as waiting for work | [SAH guide](https://scanerp.pro/blog/standard-hours-earned-sah-garment-industry.html) |
| **Capacity (SAH)** = operators × hours per day × working days × planned efficiency; **Capacity (pieces)** = capacity (SAH) × 60 ÷ style SAM | How much a unit can take on in a period | [SAH guide](https://scanerp.pro/blog/standard-hours-earned-sah-garment-industry.html) |

## Which IE formula is used most in a garment factory?

**Most IE calculations rest on standard minutes. SAM = observed time × (rating ÷ 100) × (1 + allowance%). Once each operation has a SAM, the same number feeds line efficiency, line targets, takt-based manpower, line balancing and the CM cost per garment (SAM × cost per minute). A wrong SAM therefore makes every later figure wrong.**

That is why the tables below keep pointing back to SAM or SMV. If two people in the same factory use different standard minutes for the same style, one with allowances and one without, they will report different efficiencies and quote different prices from identical work.

## Line output: efficiency, targets, takt, balancing and manpower

These formulas answer the questions a production manager asks every morning: how well did the line do, what should it make today, and how many people does this order need.

| Formula | What it tells you | Full guide |
|---|---|---|
| **Line efficiency %** = (Total minutes produced ÷ Total minutes available) × 100, where Minutes produced = first-pass output × SAM (reworked pieces are not counted again) and Minutes available = Operators × working minutes paid for | Standard minutes the line produced against the minutes it was paid for | [Line efficiency calculation](https://scanerp.pro/blog/sewing-line-efficiency-calculation-garment-factory.html) |
| **Target/hr** = 60 × operators ÷ garment SMV × efficiency (decimal) | Hourly line target at the efficiency you plan for | [Line target calculation, with calculator](https://scanerp.pro/blog/line-target-calculation-garment-industry.html) |
| **Target/day** = working minutes × operators × efficiency (decimal) ÷ garment SMV | Daily line target | [Line target guide](https://scanerp.pro/blog/line-target-calculation-garment-industry.html) |
| **Operator target/hr** = 60 ÷ operation SMV × efficiency % | Hourly target for one operation | [Line target guide](https://scanerp.pro/blog/line-target-calculation-garment-industry.html) |
| **Takt time** = available production time ÷ customer demand (same period); Takt (seconds) = working minutes per day × 60 ÷ required pieces per day | The pace at which garments must leave the line to ship on time | [Takt time, with calculator](https://scanerp.pro/blog/takt-time-garment-industry.html) |
| **Operators needed (planned)** = garment SMV ÷ takt time ÷ expected efficiency (decimal), with SMV and takt both in minutes | Line size that meets the takt time | [Takt time guide](https://scanerp.pro/blog/takt-time-garment-industry.html) |
| **Operators per operation** = SMV × target per hour ÷ (60 × efficiency as a decimal) | How many operators each operation needs so every station keeps up | [Line balancing, with calculator](https://scanerp.pro/blog/line-balancing-garment-industry.html) |
| **LBE %** = total SMV ÷ (operators × bottleneck cycle) × 100 | How much paid operator time the layout itself loses to the slowest station | [Line balancing guide](https://scanerp.pro/blog/line-balancing-garment-industry.html) |
| **Operators needed** = (order quantity × garment SMV) ÷ (working days × shift minutes × planned efficiency), rounded up | Sewing manpower for a whole order before it reaches the floor | [Manpower and machine requirement](https://scanerp.pro/blog/manpower-machine-requirement-garment-order.html) |
| **Total MMR** = total manpower ÷ operational sewing machines; **Direct MMR** = (sewing operators + helpers) ÷ operational sewing machines | People employed per running sewing machine | [Man to machine ratio, with calculator](https://scanerp.pro/blog/man-to-machine-ratio-garment-industry.html) |

### Common IE formulas with no guide here yet

These appear on common IE formula lists, such as Online Clothing Study's. We have not written full guides for them, so each is quoted from the source that states it.

| Formula | What it tells you | Source |
|---|---|---|
| **Pitch time** = garment SAM ÷ number of operators required to meet the target (Jana); Online Clothing Study writes it as garment SAM ÷ number of operations | The time each workstation should take per garment on a perfectly balanced line. No guide yet. | [Prabir Jana, Apparel Resources](https://apparelresources.com/business-news/manufacturing/great-knowledge-divide-measure-time/); [Online Clothing Study](https://www.onlineclothingstudy.com/2011/11/what-is-pitch-time-pitch-diagram-and.html) |
| **Operator utilisation %** = minutes on standard ÷ minutes attended × 100 | Share of attended time the operator spent working on standard. No guide yet. | [Prabir Jana, Apparel Resources](https://apparelresources.com/business-news/manufacturing/great-knowledge-divide-measure-time/) |
| **Machine utilisation %** = (actual machine running time × 100) ÷ time available | How much of the available time a machine actually ran. No guide yet. | [Online Clothing Study, 12 formulas](https://onlineclothingstudy.com/?p=10633) |
| **Machine productivity** = line output ÷ number of machines used to make those garments | Garments per machine. No guide yet. | [Online Clothing Study, 12 formulas](https://onlineclothingstudy.com/?p=10633) |
| **Labour productivity** = line output ÷ total manpower (operators + helpers) | Garments per person. No guide yet. | [Online Clothing Study, 12 formulas](https://onlineclothingstudy.com/?p=10633) |

Pitch time is a case where the sources differ: Jana divides the garment SAM by operators, Online Clothing Study by operations. On a line with one operator per operation the two give the same answer; on a line with several operators on long operations they differ, so state which one you use. Utilisation and efficiency are also easy to confuse: utilisation is about *time* (was the operator working on standard?), efficiency is about *output* (did the work earn the standard minutes?).

## Cost: cost per minute, CM, CMT, FOB and cost of quality

Costing on this site uses an all-in cost per minute: rent, power, admin and helpers sit inside CPM, with no separate overhead percentage on top.

| Formula | What it tells you | Full guide |
|---|---|---|
| **CPM** = total monthly factory cost ÷ (working days × hours per day × 60 × operators × line efficiency) | What one minute of sewing costs, overheads included | [Cost per minute and CM calculator](https://scanerp.pro/blog/garment-costing-cmt-calculation-guide.html) |
| **CM cost per garment** = SAM × CPM | The labour-and-overhead cost of making one garment | [Garment costing guide](https://scanerp.pro/blog/garment-costing-cmt-calculation-guide.html) |
| **Price** = (materials the factory supplies + CM cost + costs outside the CPM) × (1 + profit%) | The CM, CMT or FOB price, depending on which materials the factory buys | [CM vs CMT vs FOB](https://scanerp.pro/blog/cm-cmt-fob-meaning-garment-industry.html) |
| **COQ** = Prevention + Appraisal + Internal failure + External failure; **COQ % of sales** = COQ ÷ Sales × 100 | Everything spent to prevent, find and fix defects | [Cost of quality, with calculator](https://scanerp.pro/blog/cost-of-quality-garment-industry.html) |
| **Rework cost** = Pieces repaired × (SAM of the operations redone + timed unpicking minutes) × CPM | What repairs cost in sewing minutes | [Cost of quality guide](https://scanerp.pro/blog/cost-of-quality-garment-industry.html) |

## Quality: DHU, RFT and AQL

| Formula | What it tells you | Full guide |
|---|---|---|
| **DHU** = (total defects found ÷ total units inspected) × 100 | Defects per hundred units; counts defects, not defective garments, so it can exceed 100 | [DHU formula, calculator and benchmarks](https://scanerp.pro/blog/dhu-benchmarks-garment-factory-2026.html) |
| **RFT %** = (pieces passed first time ÷ pieces inspected) × 100 | Share of garments that pass first inspection with no rework | [RFT formula, with calculator](https://scanerp.pro/blog/rft-right-first-time-garment-industry.html) |
| **AQL:** no formula; sample size and accept/reject numbers are read from the ISO 2859-1 tables for the lot size and inspection level | How many pieces to inspect in a lot and how many defects you can accept | [AQL calculator and ISO 2859-1 tables](https://scanerp.pro/aql/) |

## People: absenteeism and labour turnover

| Formula | What it tells you | Full guide |
|---|---|---|
| **Absenteeism %** = (Person-days absent ÷ Available person-days) × 100, where available person-days = average workforce × working days | Share of scheduled worker-days lost to absence | [Absenteeism rate, with calculator](https://scanerp.pro/blog/absenteeism-rate-garment-factory.html) |
| **Turnover %** = (Separations ÷ Average headcount) × 100, where average headcount = (start + end) ÷ 2 | Share of the average workforce that left in the period | [Labour turnover rate, with calculator](https://scanerp.pro/blog/labour-turnover-rate-garment-factory.html) |
| **Retention %** = (Starting workers still employed at end ÷ Headcount at start) × 100 | How many of the people you started with you kept; not 100 minus turnover | [Labour turnover guide](https://scanerp.pro/blog/labour-turnover-rate-garment-factory.html) |

## Cutting: marker efficiency and fabric consumption

| Formula | What it tells you | Full guide |
|---|---|---|
| **Marker efficiency (%)** = Total pattern area ÷ (Marker length × Marker width) × 100 | How much of the marker is garment and how much is waste | [Marker efficiency calculator](https://scanerp.pro/tools/marker-efficiency-calculator.html) |
| **Consumption per garment** = Marker length ÷ Garments per marker; **Fabric for order** = Consumption per garment × Order quantity × (1 + Wastage% ÷ 100) | Fabric to book for an order, from the marker | [Fabric consumption calculator](https://scanerp.pro/tools/fabric-consumption-calculator.html) |
| **kg/dozen** = ((Body length + Sleeve length + Length allowance) × (Half chest + Width allowance) × 2 × GSM) ÷ 10,000,000 × 12 | Quick knit estimate without a marker (measurements in cm) | [Fabric consumption calculator](https://scanerp.pro/tools/fabric-consumption-calculator.html) |

## What are the IE tools in the garment industry?

**The four core IE tools are the time study (timing an operation and rating the operator to set a standard), the operation bulletin (the list of operations with SMV and machine type), line balancing (sharing operations so every station matches the target pace) and an SMV database (standard minutes kept for reuse across styles).**

- **Time study.** Observe and time an operation over several cycles, rate the operator's pace against normal and add allowances to get the standard time. Jana distinguishes it from a *capacity study*, which only measures what the current workforce achieves and is quicker to do ([Apparel Resources](https://apparelresources.com/business-news/manufacturing/great-knowledge-divide-measure-time/)). The method is in our [SMV calculation guide](https://scanerp.pro/blog/sam-smv-calculation-garment-industry.html).
- **Operation bulletin.** The sequence of operations for a style, each with its SMV and machine type. It is the input to line targets, line balancing and the machine requirement; see [manpower and machine requirement](https://scanerp.pro/blog/manpower-machine-requirement-garment-order.html).
- **Line balancing.** Allocating operators to operations so no station holds up the rest, then checking the bottleneck. See [line balancing in the garment industry](https://scanerp.pro/blog/line-balancing-garment-industry.html).
- **SMV database.** A library of standard minutes by operation, so a new style can be estimated from operations already studied instead of starting from zero.

## How the formulas connect

Read the tables in order and a chain appears. A time study gives the **SAM** of each operation. Added up, the operation SAMs give the garment SAM, which sets the **line target**, the **takt-based line size** and the **manpower** an order needs. The operation SAMs also drive **line balancing**. After the shift, pieces × SAM gives the minutes produced, and minutes produced ÷ minutes available gives **efficiency**. That efficiency goes into the **cost per minute**, and SAM × CPM gives the **CM cost**. Quality and people measures sit beside the chain: defects and rework cost minutes, absence and turnover remove operators the line plan assumed.

## Common mistakes with IE calculations in garments

- **Mixing SMVs with and without allowances** in one report or one quote.
- **Mixing seconds and minutes.** Our takt guide gives takt in seconds while SMV is in minutes; convert before dividing.
- **Entering efficiency as 70 instead of 0.70.** Multiplying by 70 makes the answer 100 times too big; dividing by 70 makes it 100 times too small.
- **Using attended time where the formula says worked time**, or the reverse. Efficiency and on-standard efficiency are different numbers on purpose.
- **Rounding operators down.** Manpower and operators-per-operation figures are rounded up, then the bottleneck is checked.
- **Averaging percentages across lines of different size.** Add the minutes produced and the minutes available first, then divide.

## Where the inputs come from

The formulas only need a few raw counts: pieces per operation per operator, minutes attended, defects found and the standard minutes of each operation. In Scan ERP the SMV and piece rate of each operation sit in the style template, every [QR bundle scan](https://scanerp.pro/blog/qr-bundle-tags-garment-production.html) records who did which operation on how many pieces, [ZKTeco biometric punches](https://scanerp.pro/blog/biometric-attendance-garment-factory.html) give worked minutes, and QC checkers record defects for DHU. The arithmetic itself is exactly what the guides above show, and you can do it in any spreadsheet.

## Sources

- Prasanta Sarkar, ["12 Useful Formula for Industrial Engineers in Garment Manufacturing"](https://onlineclothingstudy.com/?p=10633), Online Clothing Study: machine utilisation, machine productivity and labour productivity.
- Prasanta Sarkar, ["What is Pitch Time, Pitch Diagram and how to make a Pitch Diagram?"](https://www.onlineclothingstudy.com/2011/11/what-is-pitch-time-pitch-diagram-and.html), Online Clothing Study.
- Prabir Jana, ["Understanding Time's measures to achieve better production"](https://apparelresources.com/business-news/manufacturing/great-knowledge-divide-measure-time/), Apparel Resources, 2010: utilisation, efficiency, pitch time, time study vs capacity study.
- All other formulas: the linked guides on this site, each with its own sources.

### The Inputs, Straight From the Floor

Scan ERP records pieces per operator and operation from QR bundle scans, worked minutes from ZKTeco punches and defects from QC checks, with the SMV of each operation in the style template. Ask the founder on WhatsApp and see it on a real line.

[Ask on WhatsApp](https://wa.me/9779704778917?text=Hi%2C%20I%20read%20your%20IE%20formulas%20guide.%20I%20want%20to%20see%20how%20Scan%20ERP%20records%20production%20from%20QR%20bundle%20scans.) [Request a Free Demo](https://scanerp.pro/#contact)
