# RFT in the Garment Industry: Right First Time Formula, Calculator & Worked Example

> RFT (Right First Time) in the garment industry: meaning, full form, RFT % formula with a worked example, how it differs from DHU, and how to improve it.

**Source:** [https://scanerp.pro/blog/rft-right-first-time-garment-industry.html](https://scanerp.pro/blog/rft-right-first-time-garment-industry.html)

---

# RFT in the Garment Industry: Right First Time Formula, Calculator & Worked Example

· November 17, 2026 · 8 min read Quality Control

**Quick answer.** RFT means **Right First Time**: the share of garments that pass their first inspection with no defect and no rework.

**RFT % = (pieces passed first time without rework ÷ total pieces inspected) × 100**

Illustrative example: an end-line checker inspects **400 pieces**; **368** pass with nothing to fix and 32 go back for repair. RFT = 368 ÷ 400 × 100 = **92%**. Repaired pieces that pass later still count as failures for RFT.

Buyers, QA auditors and production managers in South Asian factories all use the word RFT, but they do not always mean the same count. One supervisor reports the share of pieces that passed end-line on the first check. Another reports the lot pass rate after repairs. A third quotes DHU and calls it RFT. The three numbers can differ widely for the same day's work, so this guide fixes the definition, runs one batch through every related metric, and then covers where RFT is measured and what actually raises it.

## What is the full form of RFT in the garment industry?

**RFT stands for Right First Time.** In a garment factory it is the share of pieces that pass their first inspection with no defect and no rework. Some factories call the same idea First Time Right (FTR) or first-pass yield. A garment that is repaired and then passes is not right first time.

Online Clothing Study describes RFT as "one of the KPIs for garment manufacturing" and as "another measure of quality performance of a plant", in which "we count how many garments are passed without any defects out of total production quantity" ([Sarkar, Online Clothing Study](https://onlineclothingstudy.com/2019/08/what-is-right-first-time-quality-in.html)). That is the meaning of RFT in garments used on this page.

In general manufacturing the phrase "right first time" describes a goal more than a number: build the product correctly at each step so nothing needs inspecting out or fixing later. In apparel the goal becomes a percentage measured at a checking point.

## How do you calculate RFT percentage?

**RFT % = (pieces passed at first inspection without any rework ÷ total pieces inspected) × 100.** Illustrative example: a checker inspects 400 pieces and 368 pass first time, so RFT = 368 ÷ 400 × 100 = 92%. Count each garment once, at its first check, and never add repaired pieces back into the passed count.

RFT % = (Pieces passed first time ÷ Pieces inspected) × 100

Where:

Pieces passed first time = pieces with zero defects at their first check

Pieces inspected = every piece presented to that checkpoint for the first time

Online Clothing Study writes the RFT formula in the garment industry as (first time passed units × 100) ÷ total production units, with the example 380 passed out of 400 produced = 95%. At an end-line table with 100% checking, "total production" and "pieces inspected" are the same number. Where checkers sample (for example, an inline round of a few pieces per operator), use pieces inspected, because the pieces nobody looked at tell you nothing about first-time quality.

### Step by step

**Illustrative example (one end-line checking table, one shift):**

Pieces presented for first inspection: **400**

Pieces with no defect: **368**

Pieces sent back for repair: **32**, carrying **45** defects between them

**Step 1:** Check the counts reconcile: 368 + 32 = 400.

**Step 2:** RFT = 368 ÷ 400 × 100

= 92%

Later that day, suppose 30 of the 32 repaired pieces pass re-inspection. The lot now shows 398 good pieces, a 99.5% pass rate. That number tells you what can ship. It does not tell you how well the line sewed: RFT is still 92%. Online Clothing Study makes the same point, noting that the lot pass percentage is not RFT because corrected garments were defective the first time.

## What is the difference between RFT and DHU?

**RFT counts good garments; DHU counts defects.** RFT asks what share of pieces passed first time, so it can never exceed 100%. DHU asks how many defects were found per 100 pieces, and one garment can carry several defects. In the same 400-piece batch, RFT is 92%, the defective rate is 8% and DHU is 11.25.

Our [DHU formula and benchmark guide](https://scanerp.pro/blog/dhu-benchmarks-garment-factory-2026.html) defines DHU as total defects found ÷ total units inspected × 100, and the defective (rejection) rate as defective pieces ÷ units inspected × 100. Running the illustrative batch through all three:

| Metric | What it counts | Calculation (same batch) | Result |
|---|---|---|---|
| **RFT %** | Pieces with zero defects at first check | 368 ÷ 400 × 100 | **92%** |
| **Defective (rejection) %** | Pieces with one or more defects | 32 ÷ 400 × 100 | **8%** |
| **DHU** | Defects, however many per piece | 45 ÷ 400 × 100 | **11.25** |

Two relationships hold for any batch measured at one checkpoint. First, **RFT % + defective % = 100%**, because every inspected piece either passed clean or did not. Second, **DHU is always at least the defective %**, because every defective piece carries at least one defect. When DHU sits far above the defective %, a few garments are carrying many faults each, which can point to one badly set machine or one operator who needs help rather than a general problem.

Which one to report? Buyers often ask for DHU. RFT is easier to explain on the floor ("92 of every 100 pieces were right"), and it lines up with cost, because every non-RFT piece is a piece someone has to unpick, resew and check again. Track both from the same tally and they can never contradict each other.

## Where RFT is measured

RFT is always "right first time *at a particular checkpoint*". State the checkpoint next to the number.

- **Inline (operation level).** A roving checker samples pieces at each operator's machine. RFT here is per operation or per operator and shows exactly where faults start. The [inline inspection report format](https://scanerp.pro/tools/inline-inspection-report-format.html) has the fields to record each round and a traffic-light column.
- **End-line (sewing output).** Usually 100% checking of every finished piece leaving the line.
- **First pass at finishing.** Checking after ironing and before packing catches stains, shading, measurement and pressing faults. A separate RFT here tells finishing how it is doing without blaming sewing for it.

Final random inspection under [AQL sampling (ISO 2859-1)](https://scanerp.pro/blog/aql-sampling-garment-inspection-iso-2859.html) is a different job: it decides whether a lot is accepted, using a sample size from the [AQL calculator](https://scanerp.pro/aql/). A lot can pass AQL after heavy repair work, which is why AQL results are not a substitute for RFT.

## What lowers RFT

Online Clothing Study's list of factors for producing quality garments is a good map of where first-time failures come from ([Sarkar, 2014](https://onlineclothingstudy.com/2014/04/key-factors-for-controlling-product.html)):

- **No quality system at each process.** Without checkpoints, a fault sewn at operation 4 is found at end-line, after every later operation has been added on top of it.
- **Raw material.** Fabric, trims and accessories that were not checked on arrival turn into garment defects no operator can prevent.
- **Training.** The article states that "operators and helpers must be trained for the job they would do". In our view, new operators and operators moved to an unfamiliar machine are a common source of first-time failures on a new style.
- **Late corrective action.** "Delay in taking corrective action makes the problem bigger." A fault reported at the end of the shift has been repeated all day.
- **Communication, handling and housekeeping.** Wrong spec information, dirty tables and careless handling produce stains, wrong measurements and damage that have nothing to do with sewing skill.

The same source sums up the rule behind RFT: "Nobody should produce defective garments/work and nobody should accept defectives work/material from other department."

## How to improve first time right

1. **Find the operation, not just the line.** A line RFT of 92% is an average. Break the 32 failures down by defect type and by the operation that caused them. If a few operations account for most of them, start there; if failures are spread evenly, look at inputs and training instead.
2. **Approve the first piece of every style and every operator.** Before bulk sewing, check the first garments off each operation against the approved sample and spec sheet. Fix the setting or the method there, when it costs one piece instead of a bundle.
3. **Train for the operation, and check again after moves.** When an operator changes machine or operation, treat her first pieces as a new first-piece check rather than assuming her skill carries over.
4. **Run inline inspection with fast feedback.** A traffic-light round at each machine catches a fault after a few pieces instead of a few hundred. Record the round on the [inline inspection report format](https://scanerp.pro/tools/inline-inspection-report-format.html) so repeated faults are visible by operator.
5. **Check inputs at the gate.** Fabric and trims inspected before cutting remove a whole class of defects from the RFT count.
6. **Review RFT with the line daily, by operation.** The number only changes behaviour if the people sewing see it while the style is still running.

## Common mistakes when calculating RFT

- **Counting repaired pieces as passed.** This turns RFT into a lot pass rate. In the example it moves the figure from 92% to 99.5%.
- **Counting a piece twice.** A garment that fails, is repaired and comes back must not be added to "pieces inspected" again for RFT. Re-checks belong in a separate rework log.
- **Dividing by lot size when you sampled.** If you inspected 80 pieces of a 1,000-piece lot, the denominator is 80.
- **Mixing checkpoints.** Inline, end-line and finishing RFT measure different things. Adding them into one number hides where the failures start.
- **Calling defect count "RFT".** Defects belong in DHU; RFT counts garments.

A note on targets: published RFT targets vary by source and by product, and this page does not quote a benchmark percentage. A basic knit with few operations and a structured jacket with many will not run at the same RFT. Compare a line with its own history on the same style and checkpoint.

## Collecting RFT without a tally clerk

RFT needs only two counts per checkpoint: pieces checked for the first time, and pieces that passed clean. On paper, those live on tally sheets that someone has to add up later. In Scan ERP the checking table is a scan point: the checker scans the bundle QR and taps pass or the defect type, so pieces inspected, defects and defective pieces accumulate as the work happens, per line and style. Damaged pieces are split into repair bundles with their own QR codes, so repair work is tracked separately from first inspection. We describe the setup in [building an apparel quality dashboard](https://scanerp.pro/blog/apparel-quality-dashboard.html) and what to look for in [garment QC software](https://scanerp.pro/blog/garment-qc-software.html).

## Sources

- Prasanta Sarkar, ["What is Right First Time Quality in Apparel Manufacturing"](https://onlineclothingstudy.com/2019/08/what-is-right-first-time-quality-in.html), Online Clothing Study, 2019. Definition, formula and the 380/400 example.
- Prasanta Sarkar, ["Key Factors for Controlling Product Quality in Garment Industry"](https://onlineclothingstudy.com/2014/04/key-factors-for-controlling-product.html), Online Clothing Study, 2014. Factors behind first-time quality.
- DHU and defective-rate definitions: [Scan ERP DHU formula guide](https://scanerp.pro/blog/dhu-benchmarks-garment-factory-2026.html).

*Santosh Rijal is the founder of [Scan ERP](https://scanerp.pro/), a garment manufacturing ERP system built for factory floor operations.*
