Book a WhatsApp demo

Absenteeism in the Garment Industry: Rate Formula, Calculator and How to Control It

S
Santosh Rijal
· November 17, 2026 · 9 min read Garment Industry

Quick answer. The absenteeism rate is the share of scheduled worker-days lost because people did not come to work.

Absenteeism % = person-days lost to absence ÷ (average workforce × working days) × 100

Illustrative example: 120 workers on average, 26 working days, 234 person-days of unplanned absence. Available person-days = 120 × 26 = 3,120. Absenteeism = 234 ÷ 3,120 × 100 = 7.5%, or 9 people missing on an average day.

Absenteeism rate calculator

Prefilled with the illustrative example. Count a half-day absence as 0.5. Runs in your browser.

Want this number from your own floor, every hour? Ask on WhatsApp →

Absenteeism in the garment industry is not mainly a payroll problem. It is a line problem. A sewing line is staffed operation by operation, so when one operator does not come in, the operation she runs loses capacity and every operation after it waits. That is why a factory needs a clear, consistent absenteeism rate before it can talk about controlling it. This guide gives the formula, a worked example, the choices that change the number, and what published research on Indian garment factories says about causes and controls.

How do you calculate absenteeism rate?

Absenteeism rate % = person-days lost to absence ÷ (average workforce × working days) × 100. Illustrative example: a factory with 120 workers on average works 26 days in a month and loses 234 person-days to unplanned absence. Available person-days = 120 × 26 = 3,120, so the rate is 234 ÷ 3,120 × 100 = 7.5%.

Absenteeism % = (Person-days absent ÷ Available person-days) × 100
Where:
Available person-days = Average workforce × Working days in the period
Person-days absent = sum of every worker's absent days (half-day = 0.5)

This is the standard HR form of the absenteeism percentage formula. AIHR writes it as absent days × 100 ÷ available workdays in the period, and advises adding up everyone's absent days and everyone's available workdays before dividing (AIHR, van Vulpen). Multiplying the average workforce by working days gives the same denominator when you do not have each worker's available days separately.

If you record attendance in hours, you can use the hours version instead. The US Bureau of Labor Statistics publishes a "lost worktime rate", defined as "hours absent as a percent of hours usually worked" (BLS, CPS Table 47). That version picks up half-days and early departures automatically.

Worked example, step by step

Illustrative example (one month, one factory):

Average workforce on the rolls: 120

Working days in the month (excluding weekly offs and public holidays): 26

Unplanned absence recorded: 234 person-days

Step 1: Available person-days = 120 × 26 = 3,120

Step 2: Absenteeism = 234 ÷ 3,120 × 100

= 7.5%

Step 3 (sense check): 234 ÷ 26 = 9 people absent on an average day, and 9 ÷ 120 = 7.5%.

Daily vs monthly absenteeism

The daily rate is absent workers that day ÷ workers scheduled that day × 100. If 14 of 120 are missing on a Monday, that day's rate is 14 ÷ 120 × 100 = 11.67%. The monthly rate is the formula above. The two answer different questions: the daily rate tells the floor manager how many operations need cover this morning; the monthly rate tells management whether the problem is growing. A month at 7.5% can contain days well above it, and it is those days that break lines, so look at both.

Should planned leave count in the absenteeism rate?

AIHR's guidance counts only unplanned absence in the headline absenteeism rate and leaves out approved time off. We recommend the same for a garment line, because approved leave is known in advance and the line can be planned around it, while unplanned absence breaks the line that morning. Track approved leave as a second, separate rate.

AIHR's guidance is to "count only unplanned absence, and leave out approved time off, such as vacation and public holidays". Not every source draws the line there: the BLS survey measures of people absent from work include vacation and personal days as one of the listed reasons. Since sources differ, write down which one your factory reports, and never compare your number with someone else's without checking.

Absence type (illustrative month) Person-days Calculation Rate
Unplanned (no notice, or same-day call) 234 234 ÷ 3,120 × 100 7.5%
Approved leave (applied for in advance) 52 52 ÷ 3,120 × 100 1.67%
All absence 286 286 ÷ 3,120 × 100 9.17%

Weekly offs and public holidays are not absence at all: they are taken out of the working days before you start.

What absenteeism does to a sewing line

A balanced line gives each operation enough operators that all of them produce at roughly the same rate. Absence breaks that balance at one point. Illustrative example: an operation with a SAM of 1.2 minutes is staffed by two operators. Each can produce 60 ÷ 1.2 = 50 pieces an hour at standard, so the station gives 100 an hour. If one of them is absent, the station gives 50 an hour. If every other operation can do 100, the whole line now runs at 50, because the operations after it wait for work and the ones before it pile up work in progress. The line has lost far more than one person's output; it has lost half its output until someone covers the gap. This is the mechanism behind the efficiency loss, and the reason line balancing has to be redone on mornings with gaps, not once per style. The effect shows up directly in sewing line efficiency, because the absent operator's colleagues are still on the clock.

Research on four garment factories in Karnataka, using six months of worker-level productivity data, found 10–11% of workers absent on a typical day, nearly all of it unauthorised. The authors found that absence shocks had little effect on productivity until average absenteeism reached about 10%; beyond that, each extra percentage point lowered productivity by about 0.25 points (Adhvaryu, Nyshadham, Tamayo et al., Ideas for India, 2021). Those figures describe those factories in that period, not a benchmark for yours.

How do you control absenteeism in a garment factory?

Measure it at the start of every shift, not at month end; keep cross-trained backups for every critical operation; agree how lines lend and borrow operators; plan around festivals and other known peaks; and give workers a safe way to raise problems. Research in Indian garment factories found that absence is mostly unauthorised and highly unpredictable in timing and scale.

Causes the research names

The Ideas for India summary lists unexpected domestic work, religious and cultural festivals that require travel to home villages, and short-term outside work that pays better for a while. Most of these are outside the factory, which is why rules alone do not remove them. Some can be planned for: festival dates are known months ahead.

Controls, in the order a factory can apply them

  1. Know the gap before the line starts. A count compiled at the end of the day is too late for line planning. Absence has to be visible at shift start, by line and by operation, so the supervisor rebalances before work piles up.
  2. Cross-train for the bottleneck operations. If only one person can run an operation, her absence stops the line. A second trained operator turns an outage into a slowdown.
  3. Make lending operators between lines routine. In the same research, managers coped by borrowing workers from other lines on an understanding that the favour would be returned, but traded with only a few partners, and many potentially beneficial transfers never happened (NBER Working Paper 29581). The Ideas for India summary adds that 72% of transfers were between lines at most 20 feet apart, and suggests a low-cost application that matches worker shortages to spare workers as reported by managers at the start of the day.
  4. Plan around known peaks. Schedule lighter loading or extra backups around major festivals and other dates you know from past attendance records, instead of discovering the gap that morning.
  5. Ask workers what is wrong, anonymously. Our garment worker retention guide covers a randomised trial in Indian garment factories where simply inviting workers to an anonymous feedback survey reduced both quits and absenteeism, and a separate trial, in a German retail chain, where a monetary attendance bonus increased absence instead of reducing it.

Common mistakes in absenteeism rate calculation

Where biometric attendance and live line data help

The formula needs two clean inputs: who was scheduled and who actually came. Paper registers make both slow and arguable. With ZKTeco biometric attendance connected to Scan ERP, punches arrive automatically and a morning report shows who is present, absent and late. Because production is tracked by QR bundle scans, the same system shows live line efficiency, so a supervisor can see which operations are short and rebalance early instead of finding the lost output at the end of the day. Absenteeism also sits alongside other measures in our list of garment factory KPIs for production managers.

Sources

Santosh Rijal is the founder of Scan ERP, a garment manufacturing ERP system built for factory floor operations.

Absenteeism per Line, From Biometric Punches

Scan ERP calculates this from biometric attendance punches on your own floor, and shows which lines are short before the shift starts: no manual register, no end-of-day estimate. Ask the founder on WhatsApp and see it on a real line.

Ask on WhatsApp Request a Free Demo

Citing this reference

Absenteeism % = person-days lost to absence ÷ (average workforce × working days) × 100. The headline rate counts unplanned absence only; approved leave is reported as a separate rate, and weekly offs and public holidays are excluded from working days.

Copy this attribution

Scan ERP — Absenteeism Rate in Garment Factories. https://scanerp.pro/blog/absenteeism-rate-garment-factory.html

Free to reproduce with attribution. Last reviewed 17 November 2026.