Book a WhatsApp demo
FREE TOOL FOR GARMENT FACTORIES

Fabric Consumption Calculator

Work out fabric per garment and fabric for the whole order from your marker, or get a quick kg-per-dozen estimate for a knit T-shirt from body measurements.

Fabric consumption formula (marker method)
Consumption per garment = Marker length ÷ Garments per marker
Fabric for order = Consumption per garment × Order quantity × (1 + Wastage% ÷ 100)
For a quick knit estimate without a marker, use the body-measurement formula in the second calculator.

Marker Method: Fabric per Garment and per Order

Use the length of the marker you will actually cut and the number of complete garments in it (the sum of the size ratio). The result is fabric length at the marker's width.

Sum of the size ratio, e.g. S1 M2 L2 XL1 = 6
Your own figure from past lots; 0 if unsure
Fill both width and GSM to see kg for knits
Fabric consumption per garment (before wastage)
Per dozen
Net fabric for the order
Wastage allowance
Total fabric to plan
A shorter marker for the same garments means less fabric per piece. Check how tightly your marker is packed with the marker efficiency calculator.

Knit T-shirt Estimate: kg per Dozen

A commonly published body-measurement formula for a basic T-shirt. It is an estimate for quoting; the marker method above is more accurate.

kg/dozen = ((Body length + Sleeve length + Length allowance) × (Half chest + Width allowance) × 2 × GSM) ÷ 10,000,000 × 12
Applies to all length and width fields
High point shoulder to hem
Hems and seams added to the lengths
Side seam allowances added to the half chest
Estimated fabric per dozen T-shirts
Per piece
This is an estimate. The formula treats the front, back and sleeves as plain rectangles. It ignores neck and armhole shapes, rib collars, and how pieces actually fit across the fabric width. Confirm with a marker before you book fabric.

Fabric Consumption Calculation Examples

The numbers below are example inputs to show the arithmetic, not targets.

Example 1: Marker method

A marker with the size ratio S1 M2 L2 XL1 holds 6 complete garments and is 7.35 m long. The order is 1,500 pieces, and the factory adds a 3% wastage allowance from its own past lots.

Consumption per garment7.35 m ÷ 6 = 1.225 m
Per dozen1.225 m × 12 = 14.70 m
Net fabric for the order1.225 m × 1,500 = 1,837.5 m
Wastage allowance (3%)1,837.5 m × 0.03 = 55.125 m
Total fabric to plan1,837.5 m × 1.03 = 1,892.625 m (about 1,893 m)

Example 2: Knit T-shirt by body measurements

A basic T-shirt with body length 72 cm, sleeve length 22 cm, 6 cm length allowance, half chest 52 cm, 4 cm width allowance, in 180 GSM single jersey. No wastage is added here.

Length72 + 22 + 6 = 100 cm
Width52 + 4 = 56 cm
Length × width × 2 × GSM100 × 56 × 2 × 180 = 2,016,000
Per piece2,016,000 ÷ 10,000,000 = 0.2016 kg (201.6 g)
Per dozen0.2016 × 12 = 2.4192 kg (about 2.42 kg)
For 1,500 pieces1,500 ÷ 12 = 125 dozen × 2.4192 kg = 302.4 kg

Why 10,000,000: length × width in cm gives cm². Dividing by 10,000 turns cm² into m², multiplying by GSM gives grams, and dividing by 1,000 turns grams into kg. The × 2 covers the front and the back. Sleeves are already included because the sleeve length is added to the body length, so do not add the sleeves again.

Which fabric consumption method is more accurate?

The marker method is more accurate because it uses the real marker that will be cut, so it already includes the gaps between pieces. The body-measurement formula treats each panel as a rectangle and ignores the actual pattern shapes and layout. Use the formula for a quick quotation, then confirm with a marker before buying fabric.

How much wastage should you add to fabric consumption?

It depends on the fabric, the style and your own cutting room. Wastage covers end loss on each lay, splicing, fabric faults and cutting errors. The most reliable figure is your own: compare fabric issued against garments cut on past lots of a similar style and fabric, and use that difference as the wastage percentage.

Garment Consumption Calculation: Which Formula to Use

To lower consumption, shorten the marker for the same garments. The cutting room fabric waste guide covers the other places fabric is lost between the roll and the bundle.

Stop Calculating Fabric by Hand.

Scan ERP keeps fabric stock and cutting batches in one place, so the fabric issued to each lot and the bundles cut from it are recorded as you work.

Book a Free Demo