Book a WhatsApp demo

Bangladesh Garment Minimum Wage 2026: How to Pay It Right From Day One (Grades, Overtime, Piece Rates)

S
Santosh Rijal
· November 18, 2026 · 10 min read Bangladesh

Updated 18 November 2026

The number the wage board sets is outside your control. Whether every worker is paid it correctly, visibly and on time is inside it. Written by Santosh Rijal, a garment factory owner who runs a 200+ machine CMT factory.

Quick answer (as of 18 November 2026). The new garment minimum wage has not been decided. The current entry-level minimum is Tk 12,500 (grade 4); workers have demanded Tk 30,000, and the wage board’s next meeting was set for 23 November. Reports differ on whether the new structure takes effect in December or January.

What to do now: pay from one record of hours and pieces that workers can see, overtime at twice basic, wages within seven working days, top-ups to each grade minimum, piece rates ready to re-price the day the new minimum is published, and fund it by saving on fabric and missing pieces, not on wages.

Workers have a legal right to correct pay, paid on time, and the right to organise. This guide is about meeting those obligations, not about preventing protest.

Where the wage board stands

How pay works in Bangladesh export factories

Export factories pay the gazetted, grade-based monthly wage. Under the RMG gazette that took effect on 1 December 2023, an entry-level grade 4 worker gets Tk 12,500, built like this (The Financial Express):

Grade 4 componentTk per month
Basic6,700
House rent (50% of basic)3,350
Medical allowance750
Transport allowance450
Food allowance1,250
Gross minimum12,500
Grade 4 minimum wage Tk 12,500 = basic Tk 6,700 + house rent Tk 3,350 + medical Tk 750 + transport Tk 450 + food Tk 1,250. Overtime is twice basic: Tk 6,700 divided by an illustrative 208 hours, times 2, is Tk 64.42 per hour.
Overtime is calculated on basic pay, not on the Tk 12,500 gross.

Higher grades sit above this; take your grade amounts from the gazette itself, as the report prints conflicting figures for some grades. Overtime and benefits are calculated on basic, not gross (Swedwatch). Workers paid by the piece still have a grade minimum.

Why pay disputes start

These findings come from particular studies, not every factory.

Checklist: pay it right from day one

Payslips a worker can read, line by line

Action: show basic, house rent, medical, transport, food, attendance bonus and overtime as separate lines, and let each worker see their own hours and pieces before payday. See our guide to piece-rate disputes.

Overtime at twice basic, on every hour punched

Action: count overtime from punches. In a published copy of the Act, section 108(1) entitles a worker to overtime “at the rate of twice his ordinary rate of basic wage and dearness allowance and ad-hoc or interim wage, if any” (Labour Act 2006, Chapter IX). That is 2× basic, not 2× gross. For piece-rated workers, the next subsection lets the employer, with workers’ representatives, fix equivalent time rates; those rates then count as the ordinary rate and the twice-basic rule in sub-section (1) does not apply. Agree the piece-rate overtime method in writing with workers’ representatives and your compliance team. The Act was amended in 2026; check the current text with your compliance team.

Overtime pay per hour = (Monthly basic ÷ Monthly hours divisor) × 2

Illustrative example: if your factory divides basic by 208 working hours a month, Tk 6,700 ÷ 208 × 2 = Tk 64.42 an hour, and 10 overtime hours = Tk 644.23 (calculated before rounding). Confirm the divisor with your compliance team.

The same copy caps a day at 10 hours with overtime and a week at 60, averaging 56 over the year. If punches show hours above the limit or your buyer’s cap, reduce the hours; don’t hide them. We recommend treating overtime as the worker’s choice.

Wages within seven working days, with the date on record

Action: fix a pay date inside the legal window and record the date each worker was actually paid. The Act’s time-of-payment rule says wages “shall be paid before the expiry of the seventh working day following the last day of the wage period” (Labour Act 2006, Chapter X). Bank, bKash and Nagad transfers already carry the date.

Attendance bonus rules written down and applied from punches

Action: write the attendance bonus rule down, share it, and apply it from punch records, not a supervisor’s judgement. The 2026 case study above found denial of this bonus normalised across the industry. See biometric attendance.

No piece-rated worker below their grade minimum

Action: every pay cycle, compare piece earnings for regular hours with the worker’s grade gross and pay the difference. We recommend not counting attendance bonus or overtime toward the minimum; confirm with your compliance team.

Top-up = Grade gross minimum − Piece earnings for regular hours (if positive, otherwise 0)

Illustrative example: 8,500 pieces × Tk 1.34 = Tk 11,390. On the grade 4 minimum of Tk 12,500, the top-up is Tk 1,110.

Rates and disputes settled with workers’ representatives

Action: take piece rates and pay complaints to the Participation Committee or the union, not only to a supervisor’s desk. Publish a short data-use statement too: scan and punch data are used to calculate pay; each worker can see and dispute their own data; the data are never used for discipline over organising.

See one worker’s pay record built from bundle scans and biometric punches →

Where the money for a higher wage can come from: stop the leaks, not the wages

A higher minimum raises labour cost. The honest place to find margin is material and pieces you already paid for but cannot account for, not lower piece rates, unpaid overtime or tighter SMV targets. In short: save on fabric, not on wages.

Illustrative polo, FOB Rs 337.11: fabric Rs 224.70 (67%), profit Rs 43.97, CM Rs 40.74 (12%), trims and thread Rs 19.16, freight to port Rs 8.54. Saving 1% of fabric is Rs 2.25 per piece, the same as cutting CM by about 5.5%.
Fabric is the biggest cost in the price, so it is the first place to look for margin.

Fabric and the cutting room first

In our garment costing guide’s illustrative polo, fabric is Rs 224.70 of a Rs 337.11 FOB (about 67%), while CM (cut and make) is Rs 40.74 (about 12%). On that polo, saving 1% of fabric is worth Rs 2.25 a piece, about 5.5% of the CM cost. On that polo, saving 1% of fabric is worth as much as cutting CM by about 5.5%, without touching anyone’s pay.

Fabric saving per piece = Fabric cost per piece × % of fabric saved

Illustrative, not a benchmark: Rs 224.70 × 1% = Rs 2.25. Plug in your own fabric cost in Tk.

Where fabric leaks: marker efficiency (marker efficiency calculator), consumption booked wrongly (fabric consumption calculator), spreading end-loss and end bits, cutting errors and recuts, and fabric issued but not returned (see cutting-room fabric waste and fabric store management). We quote no industry waste figure: measure your own.

Then the pieces

Value of the piece leak per lot = Unaccounted garments × Price per garment

FOB price for full-package orders, CM price for CMT. Unaccounted = cut quantity − (dispatched + B-grade + rework in hand + recorded damage).

Illustrative, not a benchmark: a CMT lot cut at 5,000; 4,880 dispatched, 40 B-grade, 10 in rework and 10 damaged leaves 60 unaccounted. At an illustrative CM price of Tk 45, that is 60 × 45 = Tk 2,700 on one lot. Missing bundles, short shipments and uncounted rework are the usual places to look (see WIP tracking, the finishing room and cost of quality).

Scan ERP’s lot-close report shows, per lot, fabric issued against returned, garments accounted for against unaccounted, missing bundles, labour cost per finished and dispatched garment, and damage, B-grade and rework counts. It also flags stuck, stalled and behind bundles and counts finishing at iron and fold. It does not optimise markers or calculate fabric waste.

See fabric issued vs returned and cut vs dispatched for one lot →

Re-pricing piece rates for the new minimum

Set each rate so a worker at a realistic pace earns at least their grade’s gross minimum in regular hours; Tk 12,500 is only grade 4 (entry).

Minimum rate per piece = (Grade gross minimum ÷ (Working days × Shift minutes)) × SMV ÷ Expected efficiency

SMV is the operation’s standard minutes (see SAM and SMV calculation).

For expected efficiency, use a pace most trained workers actually reach on your floor (below your measured median), agreed with workers’ representatives. If many workers need a top-up every month, the rate is too low.

Illustrative example (grade 4, not a forecast): Tk 12,500 gross, 26 working days, 480-minute shift, SMV 0.80, expected efficiency 60%.

Step 1: Paid minutes = 26 × 480 = 12,480; a paid minute must earn 12,500 ÷ 12,480 = Tk 1.0016

Step 2: Minutes per piece at 60% = 0.80 ÷ 0.60 = 1.333 (360 pieces a day)

Step 3: Rate = 1.0016 × (0.80 ÷ 0.60) = Tk 1.3355, rounded up to Tk 1.34 per piece (Tk 134.00 per 100)

Grade 4 monthly figure (illustration only)Per paid minuteRate per piecePer 100 pieces
Tk 12,500 (current minimum)Tk 1.0016Tk 1.34Tk 134.00
Tk 30,000 (workers’ demand)Tk 2.4038Tk 3.21Tk 321.00
Tk 32,000 (labour representatives’ proposal, 10 Nov)Tk 2.5641Tk 3.42Tk 342.00

Rates rounded up so the floor is met. No row is a prediction. For daily piece-rate earnings and efficiency, use our piece-rate calculator.

Piece rate minimum wage calculator

Prefilled with the grade 4 example. Enter the gross minimum for the worker’s grade. Runs in your browser.

Rounded up to the next paisa so the floor is met. Regular hours only; overtime is paid separately at twice basic.

A piece rate is only as accurate as the piece count behind it. See counts come from QR bundle scans →

What Scan ERP does today

What it does not do yet, and the workaround

Pricing is $5 per machine or $0.01 per finished piece, whichever bills lower each month, with no minimum and no per-user fee. From our pricing page: “$120/month for a 30-machine CMT factory making 12,000 pieces a month”. See also Scan ERP for Bangladesh and garment ERP for RMG factories.

For buyers’ compliance teams

A factory paying from scans and punches can show, per worker, each bundle scan, punch records with overtime hours, and the pay built from them. A new minimum raises labour cost inside the cost per minute and FOB; we recommend ring-fencing labour cost in your price rather than squeezing SMV targets. ACT, an agreement between brands and IndustriALL Global Union, works on such responsible purchasing practices.

What is the new garment minimum wage in Bangladesh?

As of 18 November 2026 it has not been decided. The current entry-level minimum is Tk 12,500 (grade 4). Workers have demanded Tk 30,000, and labour representatives on the wage board proposed Tk 32,000 on 10 November. Reports differ on timing: some say the new structure takes effect in December, others that the new pay applies from January.

How is garment overtime calculated in Bangladesh?

Section 108(1) of the Labour Act 2006, in a published copy, sets overtime at twice the ordinary rate of basic wage and dearness allowance (plus any ad-hoc or interim wage): 2× basic, not 2× gross. Illustrative: Tk 6,700 basic ÷ 208 hours × 2 = Tk 64.42 an hour, if your factory uses a 208-hour divisor.

How do you top up a piece-rate worker to the minimum?

Each pay cycle, compare the worker's piece earnings for regular hours with the gross minimum for their grade, and pay any difference. We recommend not counting attendance bonus or overtime toward the minimum. Illustrative: 8,500 pieces × Tk 1.34 = Tk 11,390, so a grade 4 worker on a Tk 12,500 minimum gets a Tk 1,110 top-up.

How often is the minimum wage revised?

A 2026 amendment to the Labour Act shortened the interval for redetermining minimum wages from five years to three, in section 139(6). The Daily Star notes this is not automatic: a revision still depends on the government directing the Minimum Wage Board. The current garment minimum took effect on 1 December 2023.

Sources

Pay From Records Both Sides Can Check

Piece-rate pay from QR bundle scans, overtime from ZKTeco punches, and a record each worker can see. Ask the founder on WhatsApp.

See one worker’s pay record in a demo

Citing this reference

Minimum rate per piece = (grade gross minimum ÷ (working days × shift minutes)) × operation SMV ÷ expected efficiency. Top-up = grade gross minimum − piece earnings for regular hours, if positive. Overtime per hour = monthly basic ÷ hours divisor × 2. Illustrative grade 4: Tk 12,500, 26 days, 480 minutes, SMV 0.80, 60% efficiency gives Tk 1.34 per piece (rounded up).

Copy this attribution

Scan ERP — Bangladesh Garment Minimum Wage 2026: How to Pay It Right From Day One. https://scanerp.pro/blog/bangladesh-garment-wage-protest-pay-transparency.html

Free to reproduce with attribution. Last reviewed 18 November 2026.