What is a broken needle policy in a garment factory?
A broken needle policy is a factory's written procedure for controlling sewing needles so that no broken piece stays in a garment and hurts the wearer. Brands give needle policies to their suppliers, and the policy is a major component of factory compliance checklists. Always follow your own buyer's version.
Bestseller's buyer manual, for example, calls its Broken Needle and Sharp Object control policy "a compulsory requirement for all BESTSELLER® suppliers" [1]. An Indian instructor-training textbook from NIMI notes that the policy is not only for infant and kidswear makers [3], and an industry guide advises keeping needle records available for audits [7].
What should you do when a sewing needle breaks?
Stop the machine at once and call the person responsible for needles. Find every piece of the broken needle and check them against a whole needle. Attach the pieces to the broken needle record, and issue a new needle only after all pieces are handed in. Write every breakage in the record.
Step by step, as the source documents describe it
- Stop and report. The operator halts the operation and notifies the product safety representative [1], or reports to the appointed responsible person immediately [4].
- Find all the pieces. "When there is a needle breakage, all remaining parts must be found" [2].
- Check them against a whole needle. The representative verifies the pieces against a whole needle to confirm none is missing [1] [5].
- Keep the pieces with the record. Broken parts are attached to the log [2]; in one sample policy they go in a clear plastic bag on a record signed by the responsible person and the machinist [4].
- Issue a new needle only against the old one. A new needle is issued only once all pieces are accounted for [1], and operators hand in every piece before a replacement is issued [2]. At Zip Industries only the Production In-Charge replaces needles, not the operator [2].
- Record it. Zip Industries' record shows date, time, machine type, operation, shift and product name [2]; an industry guide adds machine number, operator, line and needle type [7]. Bestseller's contamination records also carry style number and PO number [1].
What if a broken needle fragment is not found?
Treat nearby work as suspect. Bestseller's manual has the affected product and any work within 3 metres put in a bag or box and taken to an isolation area, and the workplace checked with a hand-held metal detector or magnet. Zip Industries, a zipper maker, checks with a hand-held detector and destroys the product if the piece stays missing.
- Isolate. Affected product and any work within a 3-metre proximity go in a bag or box to an isolation area [1]. A sample UK policy says affected garments are isolated and inspected and "should not be released until all needle parts are accounted for" [4]; an industry guide says to quarantine the product [7].
- Search. Before work resumes, the workplace is checked with a hand-held metal detector or magnet [1]. Zip Industries pulls the sewn rolls out for full examination with a hand-held needle detection device [2].
- Investigate and escalate. Bestseller's representative fills a "Missing Needle Part Investigation Report" [1]. The sample UK policy says the Factory Manager is informed [4].
- If it is still not found. Bestseller: the products are stored in a polythene bag and put in the reject box [1]. Zip Industries: the sewn rolls are destroyed, and the Production In-Charge signs the log and writes the action taken [2].
The isolation distance, who decides, and whether suspect goods are destroyed or rejected differ between documents. Use the rule in your buyer's manual.
Needle issue and exchange control
The breakage steps only work if every needle on the floor is accounted for. The sources describe these controls:
- One person controls needles. Bestseller asks for a specific individual to be appointed with full responsibility for allocating needles [1]. Needles are kept in a secure location and only issued, and recorded, by the responsible person [4].
- No spare needles at the machine. Operators may not keep spare needles; stock is held by the Production In-Charge [2]. No loose needles, new or broken, are kept in the production area [4].
- Old for new. New needles are issued under an "Issue against Receipt" policy [1], and only on return of a complete damaged one [5].
- Blunt and worn needles too. A documented process should cover replacing broken, damaged or blunt needles, and the blunt or damaged needles collected are counted and reconciled with the issue records [1]. Old needles are replaced at appropriate times to prevent breakages [4].
- Other metal. The sample UK policy bans pins and staples in the production area [4].
For choosing the right needle system and size for a fabric, see our sewing machine needle size guide.
Final metal and needle detection before packing
- Bestseller requires all apparel, accessories and footwear to go through metal detection before being packed into cartons, as the last operation before packing [1]. Its manual states detection of ferrous particles as small as 1.0 mm for children's wear and accepts 1.2 mm for adult products only, and asks for calibration when the machine is switched on and at least every two hours [1].
- The Indian NIMI textbook states that each garment needs to pass through the needle detector machine before packing [3].
- A 2018 Textile World article reports that big-box stores were directing apparel manufacturers to add metal detectors on their finished package lines [6].
- In the sample UK policy, hand-held metal detectors are used as a final check when appropriate [4]; an industry guide describes hand-held and conveyor detectors used in a metal-free area [7].
Sensitivity, calibration frequency and whether a conveyor detector is mandatory are buyer-specific. Check your buyer's manual before buying or setting a detector.
How long to keep needle records
Bestseller asks for relevant records to be kept for a minimum of 12 months [1]; an industry guide says at least one year, available for audits [7]. Your buyer may ask for longer.
Printable Broken Needle Record
One row per breakage. Print prints only this sheet, on A4 landscape. Or download the same columns as a CSV. Tape or staple the bagged needle pieces next to the row.
Broken Needle Record
If any piece is not found: isolate affected work, search with a hand-held detector, and record the disposition. Follow your buyer's needle policy. · Format: scanerp.pro/tools/broken-needle-policy.html
Filled example: one breakage
An illustrative row, not data from a real factory.
Why these columns: date, time, shift, machine type and operation come from Zip Industries' record [2]; machine number, operator, line and needle type from an industry guide [7]; style from Bestseller's contamination record [1]; the supervisor's signature follows Zip Industries' rule that the Production In-Charge signs when a piece is not found [2]. Bundle number, garments isolated and the QC sign-off are our additions so the record links to what was isolated and who released it. Add or rename columns to match your buyer's form.
About the CSV download
The download is a CSV file, not an .xlsx workbook. It opens in Excel, Google Sheets and LibreOffice. It has the same columns as the printable record, one illustrative example row to delete before use, and blank rows. A spreadsheet cannot hold the needle pieces, so keep the paper record (or the bagged pieces, labelled with the row's date and time) with it.
How Scan ERP helps after a breakage
Scan ERP does not keep a needle log; use the record above for that. What it does: every bundle is scanned at each station with the operator and the time. So after a breakage, the factory can list which bundles that operator worked on in that time window, to decide what to isolate and check. See a demo.
References
- BESTSELLER Quality Manual ver 3.1 (25 June 2025), buyer manual, publicly posted on SlideShare (not on a Bestseller website). slideshare.net
- Zip Industries Ltd (Chengalpattu, India; zipper and slide-fastener maker), Needle Policy. zeezippers.com (PDF)
- National Instructional Media Institute (NIMI), CITS Dress Making TT 2024, Lesson 51(2): Needle guard policy, p. 306. nimi.co.in
- Fashion Capital, Broken Needle Policy Report (sample factory policy). fashioncapital.co.uk
- D. Smith, "Avoiding metal hazards in finished footwear", SATRA Bulletin, April 2020 (footwear; general needle-control steps only). satra.com
- R. Spurgeon, "Using Metal Detectors And Magnetic Separators To Ensure Textile Product Safety", Textile World, 16 August 2018. textileworld.com
- Textile Industry, "Broken Needle Control Policy in Garments Industry". textileindustry.net
Cite this page
You may copy, adapt and share this page and the record format, including commercially, under CC BY 4.0, as long as you credit the source:
Scan ERP (2026). Broken Needle Policy and Needle Record Format. https://scanerp.pro/tools/broken-needle-policy.html. Licensed under CC BY 4.0.
Related guides and tools
Know Which Bundles to Check, Fast
Bundle scans record the operator and the time at each station, so the bundles from a breakage window are a search away.
See a Free Demo